Vahle SLS, Перевод оригинальной инструкции по эксплуатации

Страница: 8 / 36

SAFETY INSTRUCTIONS 6
2 SAFETY INSTRUCTIONS
2.1 Safety
This section gives an overview of all important safety aspects relating to the protection of personnel as well as
the safe use and fault-free operation. Other, task-specific safety instructions can be found in the sections on
the individual phases of the product's life.
DANGER!
Failure to observe the safety instructions may result in risks to life and health!
2.2 Intended use
Intended use
The charge contacts are intended for charging moving shuttles which travel over the bar with the built-in cur-
rent collector.
• Ambient temperature: - 30°C to +55°C
• Air humidity: r.F. 95% (non-condensing)
• Travel speed: max. 4.0 m/s
• Voltage: 0 to 48 VDC
• max. current load: 100 A (140 A at 50 % ED)
• Automatic disconnection of the charging current by the power supply units when moving up and down to
the charging contacts
• exclusively for indoor systems
• Length of the charging contact standard 4 m. Longer charging contacts on request
Foreseeable misapplication
• Incorrect installation
• Insufficient air gap in relation to surrounding, possibly conductive parts
• Insufficient maintenance
• Temperature range exceeded