Updating EasyMic Microphones from the Host Device's Web Interface
You can update EasyMic microphones from the web interface of a compatible product such as the
ConferenceSHOT AV camera or AV Bridge MATRIX PRO A/V encoder.
Only one microphone at a time can be updated.
Set everything up:
1. Go to the microphone's product page on the Vaddio website and download the update file identified
as the web firmware update. The filename ends in
.p7m
.
2. Open a browser and enter the host device's IP address to access its web interface.
o
If the microphone is connected to a ConferenceSHOT AV, point the remote at the camera and
press the Data Screen button. The camera's IP address is overlaid on the video outputs.
o
If the microphone is connected to an AV Bridge MATRIX PRO, use the knob on the front panel to
dial to the Network menu, and press the Select button. The front panel display shows the
encoder's IP address.
You may need to type
http://
or
https://
(with no space) before the IP address so the browser
does not treat the IP address as a search query.
3. Log in as
admin
.
The web interface may differ somewhat from the screen shots in this procedure.
Complete Manual for TableMIC and EasyIP TableMIC D Conference Room Microphones
8
