Operating the Camera
C
ONTROLS PAGE
(
USER OR GUEST ACCESS
)
The Controls page provides most of the same controls as the IR Remote Commander, along with some
that are not available from the remote:
n
Pan, tilt, zoom, or return to home position
n
Stop or resume transmitting live camera video (video mute)
n
Put the camera in standby or bring it back to the ready state
n
Move to camera presets, if any have been stored
n
Select a custom lighting adjustment, if any have been stored
Switching the Camera Off or On (Standby)
Use the Standby button to switch between low-power (standby) and ready states. On entering standby
mode, the camera moves to its standby position and stops sending video.
Stopping or Resuming Video
Use the Mute button to temporarily stop video from the camera without placing it in standby. Remember
that the mute button does not mute the room's microphones. In video mute mode, the camera transmits
blue or black video, with a message that the video is muted.
Managing the Camera Ready State
Use the Standby button to switch between low-power (standby) and ready states.
In standby mode, the button is red and the screen presents the message “Device is in standby.” On
entering standby mode, the camera pans 90° from center and 30° downward. Inverted cameras also point
downward in standby mode; this keeps dust from collecting on the lens.
54
Complete Manual for RoboSHOT USB Enterprise-Class PTZ Conferencing Cameras
