Connecting the Camera
Note
Talk to the network administrator before you connect the equipment.
If you install this equipment on a non-DHCP network (one that uses only static IP addresses), you may
need to configure the camera with a static IP address before you connect it to the network. Work with the
network administrator to determine how to configure the equipment.
Basic Connections – RoboSHOT 12 USB
Here is an example of how the RoboSHOT 12 USB camera might be set up in a medium-size conference
room. In this setup, a PC uses a unified communications conferencing application to manage the camera
and an EasyUSB Mixer/Amp with attached microphones and speakers.
Note
RoboSHOT 12 USB output is USB 3.0; EasyUSB Mixer/Amp is USB 2.0.
14
Complete Manual for RoboSHOT USB Enterprise-Class PTZ Conferencing Cameras