Telnet Command Reference
Vaddio's Telnet command protocol allows external devices
to control the camera. Network connectivity and a Telnet
client are required; Telnet port 23 is used. Telnet sessions
require the administrator account login.
In addition to the camera control commands, Telnet session
management commands are available – help, history, and
exit.
Note
If an AV Bridge MATRIX PRO is used, the Telnet session is
with the AV Bridge MATRIX PRO, not the camera. The
camera commands specify
camera 1
,
camera 2
, or
camera 3
, but are otherwise identical to the
camera commands in this manual. Refer to the Telnet command information in the AV Bridge MATRIX
PRO manual for more detailed information.
Things to know about Telnet:
n
The > character is the command prompt.
n
Using a question mark as a command parameter will bring up a list of available subcommands or
parameters. Example:
camera focus ?
camera focus
near
Focus the camera near
far
Focus the camera far
stop
Stop the camera focus
mode
Camera focus mode
n
CTRL-5 clears the current serial buffer on the device.
Typographical conventions used in this manual:
n
{ x | y | z}
– Choose x, y, or z. Example: camera led { on | off | toggle }
n
<variable>
– Substitute the desired value here. Example: camera ccu get <param>
n
< x - y >
– Valid range of values is from x through y. Example: camera ccu set detail <0 -15>
n
[parameter]
– Parameter is not required. Example: camera pan left [<speed>]
88
Complete Manual for RoboSHOT CAT-5 Professional PTZ Camera Systems
