Managing Lighting and Color Adjustments with the Universal CCU
RoboSHOT cameras offer lighting and color adjustments through the web interface; the Universal CCU
provides direct access to these adjustments at any time.
A Quick Look at the Menu Controls
n
Scenes buttons
– Press to select one of the camera's three custom scenes when Scene Config is
selected.
n
Function buttons
– Press to select an item to change while you are on the home menu.
n
Menu knob
– Navigation and adjustment modes. Not used for navigating to items on the home menu.
n
Select button
– Press to change the menu knob from navigation to adjustment.
n
Cancel button
– Press to change the menu knob from adjustment to navigation. This does not cancel
or undo the current adjustment.
The items on the home menu correspond to the function buttons to the left of the menu knob.
To work with an item on the home menu:
1. Press the front panel button corresponding to the menu item. (On some older units, the Bright button is
labeled Pedestal or Ped.)
2. Turn the menu knob to adjust the selected item.
Exceptions:
o
When the W Bal Auto button is illuminated, automatic white balance is selected and the Red and
Blue settings cannot be adjusted. Press the W Bal Auto button to deselect automatic white balance.
o
When the Iris Auto button is illuminated, Auto Iris is selected and the Iris and Gain settings cannot
be adjusted. Press the Iris Manual button to deselect Auto Iris.
3. When the item is adjusted properly, do one of these things:
o
Press another button to select a different menu item.
o
Press the Cancel button to put the menu knob back into navigation mode. This will not set the menu
item back to its previous value.
o
Do nothing. After a few seconds, the display blinks once to indicate that the Menu knob has returned
to navigation mode.
81
Complete Manual for RoboSHOT CAT-5 Professional PTZ Camera Systems
