VADDIO RoboSHOT 20 UHD страница 12 Скачать руководство пользователя

Страница: 12 / 73

Installing the Camera

Caution

Before you start, be sure you can identify all cables correctly. Connecting a cable to the wrong port can
result in equipment damage.

Caution

Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera
system and void the warranty.

1. Route the cables to the camera location.

2. Route the cables through the mount, and install the mount on the wall or attach it to the wall box. Leave

the screws loose enough to adjust the position of the mount.

3. Level the mount and tighten the mounting screws.

4. Check the level again.

5. Connect the cables to the camera.

Caution:

Use the power supply shipped with the camera. Using a different power supply may create an unsafe
operating condition or damage the camera, and will void the warranty.

6. Ensure that the video resolution switch and the DIP switches are set appropriately. See

Switch

Settings

7. Place the camera on the mount.

8. Attach the camera to the mount using the ¼”-20 x .375 mounting screw supplied with the camera.

Image for illustration only; not to scale. Camera and mount details may differ.

Integrator's Complete Guide to the RoboSHOT 20 UHD High Performance, Ultra High Definition PTZ Camera

Содержание RoboSHOT 20 UHD










































































Результаты поиска

Содержание RoboSHOT 20 UHD

Отзывы:

Похожие инструкции для RoboSHOT 20 UHD

Бренды по названию

Популярные бренды

VADDIO RoboSHOT 20 UHD, Интегратор: полное руководство

Результаты поиска

Содержание RoboSHOT 20 UHD

Отзывы:

Похожие инструкции для RoboSHOT 20 UHD

Бренды по названию

Популярные бренды