Web Interface
The camera provides a web interface to allow control via an Ethernet network connection, using a browser.
The web interface gives the user more control over the camera than the IR remote offers.
The web interface allows user-level camera control and password-protected administrative access to tasks
such as setting passwords, changing the IP address, viewing diagnostics, and installing firmware updates.
n
Administrative access – The default password is
password
. The admin has access to all pages of the
web interface.
n
User access – The default password is
password
. Only the camera control page is available with
user-level access.
If the LAN has a DHCP server, the camera will get its IP address, gateway and routing information
automatically and you will be able to browse to it. In the absence of a DHCP server, the camera's default
IP address is 169.254.1.1 and its subnet mask is 255.255.255.0.
You can configure the camera’s static IP address either through the network or from a computer connected
directly to its Ethernet port. You may need a crossover cable.
Note
If the camera is used with a OneLINK device, the two devices have separate IP addresses and each has
its own web interface.
Compatible Web Browsers
We have tested this product with these web browsers:
n
Chrome®
n
Microsoft® Internet Explorer®
n
Safari®
n
Firefox®
We test using the browser version available from the vendor at that time. Older versions of these browsers
are likely to work, and other browsers may also work.
6
Configuration and Administration Guide for RoboSHOT HDBT High-Performance PTZ Cameras
