A Quick Look at the Camera
The RoboSHOT 12 and 30 models are similar. The RoboSHOT 12 is the camera on the left in the photo.
Front of the Camera
n
Camera and Zoom Lens:
The 12 and 30 models use different optical components.
o
RoboSHOT 12 HDBT: 12X optical zoom lens (12X in Super-Wide mode and 10X in normal mode),
Exmor 1/2.8-type, high-speed, low noise image sensor
o
RoboSHOT 30 HDBT: 30X optical zoom lens, Exmor-R 1/2.8 type, backlit, high-speed, low-noise,
image sensor
n
IR Sensors:
Sensors in the front of the camera base receive signals from the remote. Make sure
there's nothing directly in front of the camera base, and point the remote at the camera.
n
Status indicator:
The multicolored LED indicates the camera's current state.
o
Blue:
Normal operation (blinks off momentarily when the camera receives a command from the
remote)
o
Purple:
In standby mode or booting
o
Yellow:
Firmware update in progress
o
Flashing purple:
Error
o
Red:
On-air tally
Caution
Do not remove power or reset the camera while the indicator is yellow, showing a firmware update in
progress. Interrupting a firmware update can make the camera unusable.
2
Configuration and Administration Guide for RoboSHOT HDBT High-Performance PTZ Cameras