Connecting a Cisco Camera and Codec
999-9660-000/001/009
In these diagrams, the OneLINK Bridge extends network connectivity, power, and control to a Cisco
camera, and connects the camera to a Cisco codec. The OneLINK Bridge also provides audio
connections, and can originate a USB stream to bridge non-USB equipment into a USB-based
conferencing application.
Items in these diagrams:
n
OneLINK BridgeAV interface and OneLINK EZIM
n
Cisco split cable CAB-PHD4XS2-SPLIT (not included; required for SX20 codec and for Precision 40
and Precision HD 1080p2.5x cameras)
n
Camera-side null modem cable (used on all supported Cisco cameras)
n
Codec-side null modem cable (used with Cisco split cable on SX20 codec)
n
RS-232 adapter 998-1002-232 (used with standard Cat-5 cable on C20, C60. and SX80 codecs)
n
Cisco camera (not included)
n
Cisco codec (not included)
n
HDMI display and HDMI cable (not included)
n
Laptop with soft conferencing client (not included)
n
Cat-5e cables for OneLINK and network connections (not included)
Note
If connecting to a Cisco SX20 codec, you will need to provide a Cisco split cable, Cisco part number CAB-
PHD4XS2-SPLIT. This cable is also required when connecting to a Cisco Precision 40 or Precision HD
1080p2.5x camera; you will need two of them if connecting one of these cameras and an SX20 codec.
39
Installation Guide for the OneLINK Bridge AV Interface
