autoframer tri-sync-motion
Enable or disable Tri-Sync Motion. This allows the camera to pan, tilt, and zoom smoothly. When Tri-
Sync Motion is off, the camera snaps to the new position.
Synopsis
autoframer tri-sync-motion { get | off | on | toggle }
Options
get
Returns the current state for Tri-Sync Motion.
off
Turns off Tri-Sync Motion.
on
Turns on Tri-Sync Motion.
toggle
Changes the state of Tri-Sync Motion.
Examples
>
autoframer tri-sync-motion on
OK
>
Turns on Tri-Sync Motion, so the video pans, tilts, and zooms like a motorized camera.
>
autoframer tri-sync-motion get
autoframer tri-sync-motion:
on
OK
>
Returns the current state of Tri-Sync Motion.
autoframer history
Get or set the value for the Auto-framing History setting. This is the number of seconds of data that the
camera evaluates for motion. Increase the value if the camera does not reliably detect motion in a low-
motion environment.
Synopsis
autoframer history { get | set <value> }
Options
get
Returns the current value for the history.
set
<value>
Sets the history as a floating-point value from 0 to 5
seconds.
Examples
>
autoframer history set 2
OK
>
Sets History to 4 seconds.
>
autoframer history get
autoframer history:
2
OK
>
Returns the current History value.
45
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
