Speed Adjustments
C
AMERA PAGE
Low Latency mode and High Quality mode offer different speed adjustments. When you change modes,
the speed adjustments are lost.
In Low Latency mode, you can set the camera’s zoom speed.
In High Quality mode, the following speed adjustments are available:
n
Manual pan, tilt, and zoom speeds – Used when you control camera movements with the RF remote
or the arrow buttons in the web interface
n
Tri-Sync – Only available when storing a preset. Tri-Sync specifies a speed for the camera to pan, tilt,
and zoom to the shot, as a motorized PTZ camera would do. If you save the preset without Tri-Sync,
the camera cuts to the shot instead.
Use the Pan Speed, Tilt Speed, and Zoom Speed sliders to adjust how fast the camera moves.
Setting the Direction for Camera Movements
C
AMERA PAGE
This setting is only available in High Quality mode. It returns to its default value (Normal) if you change
modes.
By default, the arrow buttons on the remote and in the web interface show the direction the image frame
moves from the camera's point of view. This may not suit your situation.
If the presenter will control the camera with the remote:
1. Select Settings to open the direction control box.
2. Set Pan Direction to Inverted to make the camera move to the presenter's left when they press the left
arrow button.
21
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
