Changing the Camera's Hostname
N
ETWORKING PAGE
If your network supports hostname resolution, you can browse to the camera using its hostname. Giving
it a simple, easy-to-remember hostname means you don't need to know its IP address. Work with your IT
department to ensure that the new hostname conforms to the organization's naming conventions.
Note
You may need to log in to the web interface again after changing the hostname.
Specifying Time Zone and NTP Server
N
ETWORKING PAGE
Using automatic NTP updating ensures that the timestamps in the camera's diagnostic log are accurate.
Specifying your time zone may make it easier to match logged events with other actions and external
events.
1. To make the time zone and NTP server editable, enable Automatic NTP Updating.
2. If you are not sure what to use for NTP Server, use the default.
3. Select the desired time zone from the list.
You may need to refresh the system time display.
Adding Room Information to the Camera's Web Interface
R
OOM
L
ABELS PAGE
The information you enter on this page is displayed on every page of the web interface. In a multi-camera
environment, you may also wish to specify what appears on the browser tab.
14
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
