Initial Device Set-Up
Vaddio cameras have a web interface for initial device set-up, administrative control, and operation.
When any Vaddio product is shipped from the factory, the admin password is not set and the
administrative controls are not available. You will need to access the web interface and set the admin
password. This gives you access to the system administration tasks to define how the device behaves as
an element of your network.
You will also need to set the admin password after restoring factory
defaults.
Because this process is the same for all Vaddio cameras, screen shots in this section may show different
products.
Browser Support
We have tested this product with these web browsers:
n
Microsoft® Edge
n
Chrome®
n
Firefox®
n
Safari®
We test using the browser version available from the vendor at that time. Other browsers (including older
versions of the ones on this list) are likely to work also.
Initial Device Set-Up Using the Vaddio Device Controller
The Vaddio Device Controller is a stand-alone tablet for working with Vaddio products.
To complete the initial device set-up with the Vaddio Device Controller:
1. Connect the touch-panel to the network on the same subnet as the products you need to work with –
for example, connect both to the same PoE+ switch.
2. Go to the touch-panel's Configuration page (gear icon) and select Scan.
3. Locate the device you need to work with, and select Use.
If the Vaddio Device Controller does not find the camera, verify that the Vaddio Device Controller and
camera are connected to the same subnet.
4. Select Exit to leave the Configuration page and open the device's web interface.
Note
The first time you access a device at a specific IP address, the Vaddio Device Controller's screen
may remain blank for 20 seconds or more.
5. Set the admin password.
Initial Device Set-Up Using the Vaddio Deployment Tool
The Vaddio Deployment Tool provides an option to do the initial device set-up for unprovisioned devices,
and provides a shortcut to each device's web interface for system administration. This tool is available as
a free download at
https://info.legrandav.com/VaddioDeploymentTool
.
Note
Be sure you have the current version of the Vaddio Deployment Tool. If it notifies you that an update is
available, install the update. This ensures that you have access to the full capabilities of the tool. Old
versions may not recognize the newest products.
8
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
