Status Lights
The lights in the camera's head indicate its current state.
n
Purple – Initializing
n
White – Active
n
Blinking red – Video is muted
n
Yellow – Firmware update is in progress
n
Blinking cyan – Remote pairing mode
n
Blinking blue – Pairing error
Caution
Do not remove power or reset the camera while the status lights are yellow, showing a firmware update in
progress. Interrupting a firmware update can make the camera unusable.
Note
By default, the status lights on Vaddio cameras are active during normal operation; however, they can be
configured to remain off even when the camera is sending video.
7
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
