streaming ip enable
Set or change the state of IP streaming.
Synopsis
streaming ip enable { get | on | off | toggle}
Parameters
get
Returns the current state of IP streaming
on
Enables IP streaming.
off
Disables IP streaming.
toggle
Changes the state of IP streaming (on if it was
off, or off if it was on).
streaming ip
enable toggle
has the same effect as
selecting the Enable IP Streaming checkbox in
the web interface.
Example
>
streaming ip enable on
> OK
Enables IP streaming.
>
streaming ip enable get
enabled: true
> OK
Returns the current state of IP streaming.
network ping
Sends an ICMP ECHO_REQUEST to the specified hostname or IP address.
Synopsis
network ping [count <count>] [size <size>] <string>
Options
<count>
The number of ECHO_REQUEST packets to
send. Default is five packets.
<size>
The size of each ECHO_REQUEST packet.
Default is 56 bytes.
<string>
The hostname or IP address where the
ECHO_REQUEST packets will be sent.
Examples
>
network ping 192.168.1.66
PING 192.168.1.66 (192.168.1.66): 56 data bytes
64 bytes from 192.168.1.66: seq=0 ttl=64 time=0.476 ms
64 bytes from 192.168.1.66: seq=1 ttl=64 time=0.416 ms
64 bytes from 192.168.1.66: seq=2 ttl=64 time=0.410 ms
64 bytes from 192.168.1.66: seq=3 ttl=64 time=0.410 ms
64 bytes from 192.168.1.66: seq=4 ttl=64 time=3.112 ms
--- 192.168.1.66 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.410/0.964/3.112 ms
>
Sends five ECHO_REQUEST packets of 56 bytes each to the host at 192.168.1.66.
>
network ping count 10 size 100 192.168.1.1
Sends 10 ECHO_REQUEST packets of 100 bytes each to the host at 192.168.1.1.
The command returns data in the same form as above.
49
Complete Manual for the HuddleSHOT All-in-One Conferencing Camera
