Installation
Please refer to the
Installation Guide for EasyIP AV-over-IP Systems
for a more system-oriented view
of EasyIP product installation. It includes information not available in this manual.
This section covers:
n
Selecting the location for the camera
n
Installing the camera mount and mounting the camera
n
Cabling notes
n
Connection diagrams
And a required safety note here:
Note
PoE type networks connected to this equipment are for intra-building use only and should not be connected
to lines that run outside of the building in which this product is located.
Don’t Void Your Warranty!
Caution
When handling cameras, always support the camera's body when lifting or moving it. Lifting the camera by
its head or mounting arm will damage it.
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Caution
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.
Before You Start
Work with the network administrator to plan your EasyIP deployment. A typical EasyIP system
includes network equipment.
Do these things before installing any Vaddio product:
n
Be sure you can identify all cables correctly.
n
Check Cat-5 cables for continuity.
n
Talk to the network administrator.
o
Inform the network administrator if you are installing the EasyIP system with a PoE+ switch. The
Luxul switch sold as part of the EasyIPecosystem is configured for DHCP operation. The network
administrator may need to take steps to ensure a trouble-free installation.
o
If you will be responsible for configuring the devices that you install, ask what hostnames (if any)
you should assign to them.
9
Installation Guide for EasyIP Systems
