VADDIO EasyIP Systems Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 95

VADDIO EasyIP Systems Скачать руководство пользователя страница 11

Installation

Please refer to the

Installation Guide for EasyIP AV-over-IP Systems

for a more system-oriented view

of EasyIP product installation. It includes information not available in this manual.

This section covers:

n

Selecting the location for the camera

n

Installing the mount

n

Cabling notes

n

Connection diagrams

n

Connecting and mounting the camera

And a required safety note here:

Note

PoE type networks connected to this equipment are for intra-building use only and should not be connected
to lines that run outside of the building in which this product is located.

Don’t Void Your Warranty!

Caution

Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm
will damage it.

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.

Caution

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.

Before You Start

Work with the network administrator to plan your EasyIP deployment. A typical EasyIP system
includes network equipment.

Do these things before installing any Vaddio product:

n

Be sure you can identify all cables correctly.

n

Check Cat-5 cables for continuity.

n

Talk to the network administrator.

o

Inform the network administrator that the EasyIP system includes a switch that is configured for
DHCP operation. The network administrator may need to take steps to ensure a trouble-free
installation.

o

If you will be responsible for configuring the camera, ask what hostname (if any) you should assign
to it.

6

Complete Manual for EasyIP Systems

«
...
9
10
11
12
13
...
»

Содержание EasyIP Systems
































































































Отзывы:

Нет отзывов