Camera Switch Settings
The DIP Switches tab of the System page provides access to these features:
Camera ID (IR Settings)
– The IR Remote Commander can control up to three cameras in the same room
with different IR frequencies. Use
IR Settings
switches 1 and 2 to select the frequency to identify the
camera as camera 1, 2, or 3; then use the Camera Select buttons at the top of the remote to select the
camera you want to control.
Image Flip
– If mounting the camera upside-down, set IMAGE FLIP ON.
Note
Inverted installation is not recommended when the ConferenceSHOT speaker is to be used.
Super Wide mode
– Provides a wider horizontal field of view and greater zoom. Some distortion may be
present.
Status light color scheme (Pro AV or UCC)
– Select the status light color scheme that meets your
needs. The Pro AV color scheme matches the color scheme used in Vaddio's non-USB cameras.
USB stream format (UVC Compliant or Client Custom)
– Client Custom enables far-end camera
control when used with the Zoom soft client.
41
Integrator's Complete Guide to the ConferenceSHOT AV Enterprise-Class Conferencing System
