Initial Device Set-Up and System Administration Tasks
Vaddio cameras have a web interface for initial device set-up, administrative control, and operation.
When any Vaddio product is shipped from the factory, there is no admin password and the administrative
controls are not available. This is also true if you restore factory defaults, which returns the device to a "like
new" state. Initial device set-up includes setting the admin password, and may include additional tasks.
After initial device set-up is complete, you will need to complete system administration tasks to define how
the device behaves as an element of your network.
Browser Support
We have tested this product with these web browsers:
n
Chrome®
n
Firefox®
n
Microsoft® Edge and Internet Explorer®
n
Safari®
We test using the browser version available from the vendor at that time. Other browsers (including older
versions of the ones on this list) are likely to work also.
Initial Device Set-up Process Overview
The sequence of tasks for initial device set-up and system administration differs somewhat, depending on
which method you use.
Ways to access the camera for initial device set-up:
n
Access the web interface from a Vaddio Device Controller
– The touch-panel automatically scans
the subnet to locate Vaddio devices. Select the desired device and exit to the device's web interface to
complete the initial device set-up.
n
Locate and set up the camera using the Vaddio Deployment Tool
– This tool is available as a free
download at
https://info.legrandav.com/VaddioDeploymentTool
. The tool scans the network for Vaddio
devices, lists them by model and IP address, identifies all devices that are not set up, provides the
controls to complete the initial device set-up, and provides links to each device's web interface.
n
Access the web interface directly
– The classic method. Discover the camera's IP address and
browse to its web interface.
12
Installation Guide for the ConferenceSHOT FX USB 3.0 Fixed Camera
