manualshive.com logo in svg

VADDIO AutoTrak 2.0, Инструкция по установке и эксплуатации, Страница: 41 / 52

Поделиться
Скачать
VADDIO AutoTrak 2.0 Скачать руководство пользователя страница 41

AutoTrak 2.0 Camera Tracking System  

AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. E                                                      Page 41 of 52 

AutoTrak 2.0 General Specifications

*

:

 

AutoTrak 2.0 Belt Pack and Lanyard 

Battery Type and Size 

4400mAH Lithium Ion 

Battery Life 

Typical Full-Charge Time: @ 9hours (from dead battery) 

Connectors 

5-Pin mini XLR-M 

Belt Pack Size 

4.5”(114.3mm) H X 3.0” (76.2mm) W X 1.25” (31.75mm) D 

Battery Pack Weight 

.15 lbs. (.068 kg) 

Lanyard Necklace Length 

24” (609.6mm) 

Lanyard Cable Length 

32” (812.8mm) 

Lanyard Cable  

5-Pin mini XLR-F, Strain Relieved on both ends, attached to the Lanyard 

Lanyard Weight with Cable 

0.15 lbs (0.0680388555 kg - roughly) 

AutoTrak 2.0 CPU 

Processor 

Intel® Atom™ Dual Core Processor 

Graphics 

Intel Graphics Media Accelerator 

RGBHV Output 

One (1) DE-15F (HD-15F) Connector (resolution limited to 800 x 600 @ 60 Hz) 

Video Capture Card 

Internal with 3-RCA-F and 1-Y/C-F Connectors, Use the center RCA connector for AutoTrak 2.0 

Memory 1GB 

DDR2 

Storage 16GB 

SSD 

Ethernet 

Two (2) Gb Ethernet ports on RJ-45 (Application Does not support the Ethernet ports) 

RS-232 Interfaces 

Three (3) RS-232 on DB-9M (DE-9M) 

USB Ports 

Six (6) USB 2.0 Ports 

Dimensions/Weight 

1-RU - 1.72” (43.7mm) H  x 18.93” (480.8mm) W  x 10” (254mm) D / 8.8lbs (4.0kg) 

Power 

110V -240V 50/60Hz Switching Power Supply (internal) 

AutoTrak 2.0 HD-18 Camera 

Image Sensor 

1/3-Type CCD 

Picture Elements 

1.3 Megapixel 

Signal System 

HD:  1080p, 1080i or 720p @ 59.94; 1080p @ 60/50/30/25; 1080i or 720p @ 50SD:  Composite - NTSC or PAL (simultaneous 
HD & SD Out) Crop, Squeeze or Letterbox Modes  

Lens 

18x Optical Zoom 

Focal Length 

f=4.7 to 84.6mm  

Horizontal Viewing Angle 

3.2 to 55.2 degrees (16:9) 

Video S/N Ratio 

>50 dB 

Invertible Yes 

Minimum Illumination 

1.8 Lux 

Serial Communication 

RS-232 (9600 - Default for AutoTrak 2.0) 

Pan Range 

+170 degrees to -170 degrees 

Tilt Range 

+90 degrees to -30 degrees 

Dimensions (H x W x D)  

8.55” (217.2mm) H x 6.748” (171.4mm) W x 7.134” (181.2mm) D  

Weight 

5.8 lbs (2.63 kg) 

AutoTrak 2.0 HD-20 Camera 

Image Sensor 

6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor 

Picture Elements 

3.27 Megapixels 

Signal System 

1080i/59.94/60, 1080/50i, 720p/59.94/60, 720/50p, 1080/30p and 1080/25p (SD Resolutions not Supported) 

Lens 

20x Optical Zoom Lens with  HiLD™ (High Index Low Dispersion) Glass, F1.6 Wide to F3.5 Tele, 11-Elements in 9-Groups 

Focal Length 

f=4.7mm wide to 94mm tele 

Horizontal Viewing Angle 

2.9° to 55.2° - 16:9 Format 

Video S/N Ratio 

>50 dB 

Invertible 

Yes - With No Frame Delay 

Minimum Illumination 

1.6 LUX (F1.6, 50IRE) 

Serial Communication 

RS-232 (Modified VISCA) (9600 - Default for AutoTrak 2.0) 

Pan Range 

Pan:  +170 degrees to -170 degrees 

Tilt Range 

Tilt:  +90 degrees to -30 degrees 

Dimensions (H x W x D)  

7.81” (198.37mm) x 6.67” (169.42mm) x 7.057” (179.25. mm) 

Weight 

5.6 lbs. (2.63083592 kg.) 

OPTIONAL EasyTalk AutoTrak 2.0 Wireless Audio Interface 

 

Part Numbers 

999-7230-000 - North America, 999-7230-001 - Int’l 

Audio Outputs 

Balanced Line Level (on XLR - M connector) +4dBu 
Unbalanced Line Level (on RCA-F connector) -10dBV 

Mic Output Volume Control 

10k Audio Taper Potentiometer 

Switch Gear 

Tactile illuminated push button blue LED Power Switch (ON/OFF), and Mic Mute (Mute when lit) 

Status Indicator 

Blue LED 

Display/LED Indicators Speed 

Less than 299,792,458 meters per second (accounting for the index of refractivity of air - 1.0003 

Antenna Connector 

One (1) RP-SMA connector 

Power Supply/Connector 

12 VDC, 1.0 Amp Switching Supply, 5.5mm OD x 2.5mm ID coax receptacle on AutoTrak 2.0  

Weight 

Approx. 3.3 lbs (1.496854821 kg)  

Dimensions Audio Interface 

1.72” (43.688mm) H x 18.93 (480.822mm) W x 6” (152.4mm) D 

Part Numbers 

 

999-7250-000 

AutoTrak 2.0 with Dual HD-18 Kit with Quick-Connect DVI/HDMI - North America  

999-7260-000 

AutoTrak 2.0 with HD-18 and HD-20 Kit with Quick-Connect DVI/HDMI - North America 

999-7250-001 

AutoTrak 2.0 with Dual HD-18 Kit with Quick-Connect DVI/HDMI - Int’l  

999-7260-001 

AutoTrak 2.0 with HD-18 and HD-20 Kit with Quick-Connect DVI/HDMI - Int’l 

999-7230-000 - North America,  
999-7230-001 - Int’l 

OPTIONAL EasyTalk AutoTrak 2.0 Wireless Audio Interface 

Origin 

Made in the USA with the exception of the AutoTrak 2.0 CPU (assembled in the USA) 

*

All Specifications are subject to change without prior notice. 

Содержание AutoTrak 2.0





















































Отзывы:

Нет отзывов