Document Number 411-0042-33 Rev A – June 2021
Operator's Guide for the
AV Bridge 2x1 Presentation Switcher
About this Guide
This guide covers the device's physical features and operation.
For complete product information, see the
Complete Manual for the AV Bridge 2x1 Presentation
Switcher
, which includes installation, system administration, configuration, serial command reference,
and full troubleshooting.
Features
n
The perfect solution for rooms where you only need two cameras: 2x1 video switcher bridges two
HDMI cameras or other video sources into a soft-client conferencing or IP streaming environment
n
Simultaneous USB 3.0 and IP streaming (RTSP or RTMP), video and audio
n
Delivers IP stream resolution up to 1080p/30 and USB stream resolution up to 1080p/60
n
Supports HDCP
n
Multiple audio formats: USB and IP stream, analog, HDMI, Dante
®
networked audio
n
Phantom power to microphones
n
Connections for up to five external trigger devices
Front Panel
n
Swap
button – Changes the selected input. If the PIP is turned on, this also exchanges the PIP and
main image on the HDMI output.
n
PIP
button – Toggles the PIP on or off. Illuminated when the PIP is on.
n
Stream
button – Toggles the IP stream on or off. Illuminated when the stream is available.
n
IP
button – Press to display the device's IP address in the streams and video output, or to clear the
information display. Illuminated when the IP address information is displayed. When the device is in
standby, press to return to operation.
n
Reset
button – Press to reboot the device. Illuminated during normal operation. Blinks to indicate an
error.