Assigning Macros to Triggers
C
ONTROL
D
EVICES PAGE
, T
RIGGERS TAB
A trigger may be associated with a macro that runs when the trigger is on, one that runs when the trigger is
off, or one of each.
To assign a macro to a trigger:
Do at least one of these things:
n
Select a macro in the Execute Macro on Enter field. This macro will start when the trigger turns on.
n
Select a macro in the Execute Macro on Exit field. This macro will start when the trigger turns off.
Right-click a trigger label or test button to rename the trigger.
Example: Assigning a single macro to the Home button of the connected TableMIC microphone:
1. On the Macros tab of the Control Devices page, name and create the macro. Then test, debug, and
save it.
2. If you want this macro to run every time you tap the TableMIC microphone's One Touch button, got the
Audio page and set the One Touch Button mode to Momentary. Otherwise it will run
every other time
you tap the button.
3. On the Triggers tab of the Control Devices page, locate One Touch in the list of trigger events, and
select the macro from the list of available actions for Execute Macro On Enter.
To remove macro assignments from a trigger:
Select the X on that trigger's row. This is equivalent to setting both macros to
(none)
.
73
Complete Manual for EasyIP Systems
