Locating and Pairing to Dante Devices
D
ANTE
C
ONTROLLER APPLICATION
Notes
The Dante chip in the EasyIP Mixer has its own IP address and device name. These do not correspond to
the EasyIP Mixer's hostname and IP address in the web interface.
The screen shots in this section show a different product, "AVB2x1." The process for locating the EasyIP
Mixer and pairing it to Dante speakers and microphones is the same.
To physically locate Dante devices using the Dante Controller application:
1. Open the Device Info tab to see the IP address and other information about each Dante device on the
subnet that your computer is on.
2. From the main Network View, select Device : Device View. The Device View window opens.
Note that EasyIP Mixer devices will show the IP address of the Dante chip, not device's web server IP
address.
3. In the Device View window, select the device of interest. The window presents information about the
device.
4. Select the Identify icon. The way the device responds depends on the device. The EasyIP Mixer
responds by blinking all the lights on the front panel. To stop the identifying behavior, select the Identify
icon again.
Other ways to access the Identify function:
The EasyIP Mixer's Audio page provides an Identify button for EasyIP microphones.
The Vaddio Dante Interface Application includes an Identify button.
41
Complete Manual for EasyIP Systems
