Initial Set-Up and Access to Administrative Controls
Like other Vaddio products, EasyIP cameras and host devices have a web interface for initial device set-
up, administrative control, and operation. After initial device set-up, the web interface provides password-
protected pages for administrative access to tasks such as configuring network and security settings,
customizing device behaviors, and installing firmware updates. The administrator can configure the
operator's pages to be password-protected or not.
When any EasyIP product is shipped from the factory, no password is set and the administrative controls
are not available. Initial device set-up includes setting the password for the
admin
account, and may
include additional tasks.
Note
Because restoring factory defaults returns the product to a "like new" condition, you will need to do the
initial device set-up again if you restore factory defaults.
After initial device set-up is complete, you will need to complete system administration tasks to define how
each device behaves as an element of your network.
Browser Support
We have tested this product with these web browsers:
n
Chrome®
n
Firefox®
n
Microsoft® Edge and Internet Explorer®
n
Safari®
We test using the browser version available from the vendor at that time. Other browsers (including older
versions of the ones on this list) are likely to work also.
21
Complete Manual for EasyIP Systems
