VADDIO 999-50707-001G Скачать руководство пользователя страница 50

Страница: 50 / 69

audio mute

Gets or sets the mute status of the specified audio channel.

Synopsis

audio < channel > mute { get | on | off | toggle }

Channels

master

Applies the command to all audio channels.

mic_input

Applies the command to the built-in
microphones.

easy_mic_1

Applies the command to the external
microphone connected to the EasyMic port.

usb_playback

Applies the command to the audio portion of the
incoming (far-end) USB stream

speaker

Applies the command to the audio from the
speakers.

usb_record

Applies the command to the outbound (near-
end) audio portion of the USB stream

ip_out_left
ip_out_right

Applies the command to the outbound (near-
end) audio portion of the IP stream, left and right
channels.

Options

get

Returns the current mute status of the specified
channel.

Mutes the audio for the specified channel.

off

Unmutes the audio for the specified channel.

toggle

Changes the mute state for the specified
channel – unmutes if it was muted, mutes if it
was not.

Examples

audio line_out_1 mute get

mute:

off

OK
>

Returns the current mute state of the device connected to audio line out 1. Mute is
off, so the audio is on.

audio master mute on

OK
>

Mutes all audio.

Complete Manual for the HuddleSHOT All-in-One Conferencing Camera

Содержание 999-50707-001G






































































Результаты поиска

Содержание 999-50707-001G

Отзывы:

Бренды по названию

Популярные бренды

VADDIO 999-50707-001G, Полное руководство

Результаты поиска

Содержание 999-50707-001G

Отзывы:

Бренды по названию

Популярные бренды