Operating the Camera from the Web Interface
C
AMERA PAGE
(
USER OR GUEST ACCESS
)
By default, the operator's page of the web interface is not available. The administrator must set a password
for the
user
account or enable guest access.
Only the operator's page is available with user or guest access.
The operator's Camera page provides most of the same controls as the IR Remote Commander, along with
some that are not available from the remote:
n
Pan, tilt, zoom, or return to home position
n
Stop or resume transmitting live camera video (video mute)
n
Mute or unmute the microphone(s)
n
Change the speaker volume
n
Put the camera in standby or bring it back to the ready state
n
Move to camera presets, if any have been stored
Stopping or Resuming Video
Use the video mute button to temporarily stop video from the camera without placing it in standby.
Remember that the mute button does not mute the room's microphones. In video mute mode, the camera
transmits blue or black video, with a message that the video is muted.
66
Complete Manual for the ConferenceSHOT AV Enterprise-Class Conferencing System
