To edit an existing macro:
Select the Edit button associated with the macro, make your changes in the Macro Editor, and save your
work.
To create a new macro based on an existing one:
Select the Edit button for the existing macro to open it, and use the Save As button to give it a new name.
Then select its Edit button again, and make the desired changes.
Testing Macros
C
ONTROL
D
EVICES PAGE
, M
ACROS TAB
The Macro Editor has a Test button to run a macro while you are editing it. You can also test macros after
saving them. The Macro Execution Log shows the result of each test.
52
Complete Manual for the ConferenceSHOT AV Enterprise-Class Conferencing System
