Changing MTU
S
TREAMING PAGE
The default packet size for streaming is 1400. Do not change this except in consultation with your network
administrator.
Setting up Custom Functions and Third-Party Control
The Control Devices page provides a way to define programmed behaviors and use third-party control
devices to manage the camera.
Macros
are sequences of commands. A macro can only run successfully if all the commands are able to
run successfully. For example, if the macro sends the camera to a preset position, that preset must be
defined. Refer to the
section for a full list of commands.
Triggers
, whether hardware or software, register events or state changes that can be associated with
macros, to make them run. For example, the One Touch (Home) button on a TableMIC is a hardware
trigger.
Software triggers allow you to program custom functions for third-party control devices, such as defining
the buttons on a conference room touch-screen. Hardware triggers (labeled One Touch in the web
interface) allow you to define responses to connected Vaddio trigger devices such as tabletop
microphones.
50
Complete Manual for the ConferenceSHOT AV Enterprise-Class Conferencing System
