vacuubrand VACUU-PURE 10, Инструкция по эксплуатации

Страница: 20 / 88

20 20901220_EN_VACUU·PURE 10_V1.6_060722
Safety information
Prevent condensate return
Condensate in the outlet line can damage the vacuum pump.
Condensate must not flow back into the outlet or vacuum pump
through the hose line. Liquid must not accumulate inside the
outlet line.
>
Preferably route the outlet line with a fall from the outlet, i.e.,
running downward so that no backup forms.
Prevent foreign bodies inside the pump
Particles and dust must not enter the vacuum pump during normal
operation.
>
Do not pump any substances which could form deposits
inside the vacuum pump.
>
Install suitable filters upstream of the inlet. Suitable filters are
chemically resistant, clog‑proof and have a reliable flow rate,
for example.
>
Replace porous vacuum hoses without delay.
Hazards during venting
The vacuum pump does not create a vacuum‑tight seal when it
switches off. Depending on the application, venting can cause
explosive mixtures to form in systems or other hazardous
situations to arise.
>
Install a shut‑off valve in the inlet line to isolate your
application from the vacuum pump with a vacuum‑tight seal.
Condensate in the
outlet line
Foreign bodies
Hazards during
venting