Safety information
20901118_EN-US_PC301x VARIO select Serie_V1.3_100720
21
ATEX equipment labeling
ATEX equipment
category
Vacuum equipment labeled with
has ATEX approval in line
with the ATEX marking on the rating plate.
Operation is only permitted when in perfect working condition.
The product is designed for a low level of mechanical stress and
must be installed in such a way that it cannot sustain mechani-
cal damage from outside.
ATEX equipment
category and pe-
ripheral devices
The ATEX equipment category of the device is dependent on
the connected components and peripheral devices. Compo-
nents and peripheral devices need to have the same or higher
ATEX approval.
Prevent ignition
sources
The use of venting valves is only permitted if this would not nor-
mally, or only rarely, cause explosive mixtures in the interior of
the device, or do so only for a short time.
ð
If necessary vent with inert gas.
Information on the ATEX equipment category is also available
online at:
2.11 Disposal
NOTICE
Incorrect disposal of electronic components can dam-
age the environment.
Used electronic devices contain harmful substances that can
cause damage to the environment or human health. Disused
electrical devices also contain valuable raw materials, which
can be recovered for reuse if the device is disposed of cor-
rectly within the recycling process.
End users are legally obliged to take used electric and elec-
tronic devices to a licensed collection point.
ð
Correctly dispose of electronic scrap and electronic compo-
nents at the end of their service life.
ð
Observe the national regulations regarding disposal and en-
vironmental protection.
