vacuubrand DVR 3pro, Инструкция по эксплуатации, Страница: 28 / 52

28 20901134_EN_DVR 3pro_V1.4_060420
Operation
5.2.2 5.2.2 Adjust switch on time and measuring cycle Adjust switch on time and measuring cycle
Adjust power‑on time
1.
Switch on the gauge and press MODE MODE key.
5
On the display: Adjust power‑on time.
5
Display of the new pre‑set power‑on time, e. g., 5
Minutes (= delivery state).
2.
Press the UP/DOWN UP/DOWN key repeatedly or hold it until the
required
power‑on time is displayed, e. g., 20 Minutes.
ƒ
Power‑on time min. 1 – 600 Minutes;
On On
= permanent ON
ƒ
Changing pointer direction with MODE key MODE key
= decrease value / = increase value
5
Display of the new pre‑set power‑on time.
5
This setting switches off the gauge automatically after 20
minutes.
3. Press key ON/OFF ON/OFF to confirm the
adjustment.
5
On the display: Pre‑select measuring cycle.