6
Playback
1. Playback on DVR site
Click on remote controller, to enter record list, using
to select footage , click again to enter playback screen.
(Use remote controller)
Playback menu
Playback screen
2. 3G client software for viewing directly
Executive “3G ClientApp.exe software and login (bus/123456) ,
the software interface shown as below.
(Select models with 3G modules)
5
Choose split screen
Add the vehicle information
Login
Preview
Vehicle name
Camera Channel
The event log and
vehicle driving records.
Google Map and inquiry the date
and time record of the vehicle.
Vehicle information
Google Map
Real-time image
«
For more detailed information, please check the manual
in CD for reference.
H12A650H01
3. Through Carbox Player on PC site
(Use HDD to playback directly)
★
GPS Coordinate, Speed and Google Map
(select models with 3G modules)
Viewer interface schematic
Note:
before running CarBox2 software.
Caution: It needs to install DirectX 9.0 or above
Position
Latitude &
Longitude
G Sensor
Speed
Video Searching BAR
Play Speed
Volume
Control Interface
Description
Hard Disk Backup
Configuration
Map
Open Folder
Snapshot
3G client software
Note: To perform this software will require DirectX 9.0 or more.
★
Power on / Record
Turn on the power, and it will take approximately 40 seconds to
boot up. During the recorder booting up, the HDD indicator LED will
start flashing as the recording is in progress.
1. Red light: light on, means power on; light off, means no
power/power off.
2. Green light: light flashing, means HDD take recording; light off
means non-recording.
★
Power off/Stop recording
Power off also stop recording, at then you can take out HDD to
read the recorded files.
Quick
Guide
Vehicle
4-CH DVR System
Power On(
) / Record(
)
Turn off
Stop record
.
Standard: Main Machine, Remote Control, 3 Pin Power Cable,
Harness Plug for Video Input , Alarm Cable, Driver CD,
Quick Guide
2
.
Optional: 3G Module, G-Mouse
1
Accessories
Feature
Select
Decode
Items
Start Record Time
2011/06/30 17:05:13
2011/06/30 18:09:42
2011/06/30 19:14:06
2011/06/30 20:18:30
2011/06/30 21:22:54
Page 00001
2011/06/30 16:00:46
End Record Time
2011/06/30 18:09:41
2011/06/30 19:14:05
2011/06/30 20:18:30
2011/06/30 21:22:53
2011/06/30 22:27:14
Total Pages 00003
2011/06/30 17:05:13
Execute the CarBox2.exe from CD-ROM , the display as showing
below.
G-sensor: Detect & record G-force data.
X: Induct about level of vehicles moving
Y: Induct around level of vehicles moving
Z: Induct Height fluctuation around level of
vehicles moving
Setting
Recording Set Up
Please follow the steps below:
1. Plug the
into PC directly or through USB converter.
2. Execute the player CarBox2.exe into main page.
3
.
Click
icon to into the screen as below.
HDD
Select the location
of HDD
format
restore
ê
For more detailed information, please check the
manual in CD for reference.
HDD Format / Restore
Q: Two ways to format the HDD, format and restore.
When should you
「
format
」
or
「
restore
」
the HDD?
Ans:
1.
「
Format
」
HDD: When you use the HDD for the very first time or a
brand new HDD, you should format it in order to use it correctly.
2.
「
Restore
」
HDD: When you have backup the recorded files into PC and
want to use the HDD for other purposes, you have to restore it first
so it can be used correctly.
1. On Screen Set up
2. Through CarBox2 Player in case without Monitor
A:Remove the HDD and plug it to PC
B:Launch the software enter setup page show below:
Before start recording, please configure the setting well and then
into the host. The configuration interface of its options detailed instructions,
please see the operation manual of CD-ROM.
plug HDD
2011 DEC V1.0
optional
TYPE B: 3G Module
TYPE A: Without 3G Module
H.264
-20~+65
℃
(
inside vehicle
)
120/100fps
NTSC/PAL
ALARM
Audio
4CH
3D
G-Sensor
SATA HDD
2.5"
HDD
3G Module
3G
TYPE B
GPS
1. Provide Video output for playing-back mode in mainframe.
2. Recording format: D1 and CIF
3. Support 1CH Audio Input.
4. User friendly player software, easy to operation.
5. Overall quick search event log.
6. The full recording time and date can be showing in the monitor directly.
7. Wide range voltage design.
8. Auto recording after power supplied.
9. Removable HDD Track compatible with 2.5" HDD or SSD.
10. Provide 4 sets of alarm input ports, built-in buzzer.
11. Firmware can be upgraded via USB port.
12. Support recording audio, video, G-sensor and GPS data at the same time.
13. Optional 3G module, for real time monitoring the driving statue, or talk
to driver
