Vacon X5, Руководство пользователя

Страница: 99 / 140

X5 AC Drive User’s Manual Chapter 7: X5 Parameters
DPD00089A - 97 -
© 2009 Vacon Incorporated All Rights Reserved
743 Thres 2 Select Default: 15 (Curr High)
Range: n/a
Level 2
This parameter selects the type of threshold to be used for Threshold 2.
Parameter Value Description Parameter Value Description
0 Vin 1 High 11 Load In
1 Vin 1 Low 12 Power High
2 Vin 1 In 13 Power Low
3 Vin 2 High 14 Power In
4 Vin 2 Low 15 Curr High
5 Vin 2 In 16 Curr Low
6 Cin High 17 Curr In
7 Cin Low 18 Enc % High
8 Cin In 19 Enc % Low
9 Load High 20 Enc % In
10 Load Low
For detailed information about setting up Threshold parameters, see “Thresholds” on page 58 .
744 Thres 2 High
Default: 100.00%
Range: -300.00% to 300.00%
Level 2
This parameter sets the High Thres level for Threshold 2. For detailed information about setting up Threshold
parameters, see
“Thresholds” on page 58 .
745 Thres 2 Low Default: 0.00%
Range: -300.00% to 300.00%
Level 2
This parameter sets the Low Thres level for Threshold 2. For detailed information about setting up Threshold
parameters, see
“Thresholds” on page 58 .
746 Timer 1 Type
Default: 0 (On Delay)
Range: n/a
Level 2
This parameter defines the configuration of Timer #1 that you want the drive to emulate.
Parameter Value Description
0 On Delay
1 Off Delay
2 On/Off Delay
For detailed information about setting up Timer parameters, see “Timers” on page 58 .
747 Timer 1 Signal Default: DI-REV
Range: n/a
Level 2
This parameter selects the function that the timer is counting; it includes any function listed in the digital input list.
See Parameter
705 , Relay 1 Select, on page 93 for the list of options. For detailed information about setting up Timer
parameters, see “Timers” on page 58 .
748 Timer 1 Time Default: 1.0 sec
Range: 0.0-320.0 sec
Level 2
This parameter specifies the duration of time in seconds for the timer to count. For detailed information about setting up
Timer parameters, see
“Timers” on page 58 .
749 Timer 2 Type
Default: 0
Range: n/a
Level 2
This parameter selects the kind of timer to be used, as shown in the following options:
Parameter Value Description
0 On Delay
1 Off Delay
2 On/Off Delay
For detailed information about setting up Timer parameters, see “Timers” on page 58 .
Table 7-2: Description of X5 Parameters (Page 27 of 40)