Vacon X5, Руководство пользователя

Страница: 82 / 140

X5 AC Drive User’s Manual Chapter 7: X5 Parameters
DPD00089A - 80 -
© 2009 Vacon Incorporated All Rights Reserved
This parameter allows you to enable and configure a data logger feature called the “Keeper.” The Keeper parameters
( 380 through 389 ) are hidden until you enable the Clock parameters (select Yes for parameter 150 , Show Clock
Parameters ). The following parameter values determine the input for the Keeper:
Parameter Value Description
0 Disabled
1 Vin1
2 Cin
3 Vin2
4 Encoder
For detailed information about setting up Keeper parameters, see “Using the Keeper Data Log” on page 55 .
381 Keeper Max Scale
Default: 1000
Range: 1 - 32000
(units dependent on parameter 389 )
Level 2 (Clock)
This parameter configures the value of the Keeper input signal when the analog input is at its maximum value. For
detailed information about setting up Keeper parameters, see
“Using the Keeper Data Log” on page 55 .
382 Keeper Save Time
Default: 0:00
Range: 00:00 - 23:59
Level 2 (Clock)
This parameter sets the time of each day when the Keeper will save an accumulated process variable. For detailed
information about setting up Keeper parameters, see
“Using the Keeper Data Log” on page 55 .
384 Keeper Save Rate
Default: 24 hour
Range: n/a
Level 2 (Clock)
This parameter configures whether the Keeper will collect multiple records during a day, with these options:
Parameter Value Description
0 24 Hour
1 12 Hour
2 8 Hour
For detailed information about setting up Keeper parameters, see “Using the Keeper Data Log” on page 55 .
385 Keeper Input Value Default: Read-only
Range: 0 - 32000
Levels 2 (Clock)
This parameter provides feedback to display the current value of the Keeper input. For detailed information about setting
up Keeper parameters, see
“Using the Keeper Data Log” on page 55 .
386 Keeper Time Rate
Default: 1 (Minute)
Range: n/a
Level 2 (Clock)
This parameter configures the tiime base of the Keeper accumulation. The setting of this variable is dependent on the
process variable.
The following parameter values are valid:
Parameter Value Description
0 Second
1 Minute
2 Hour
For detailed information about setting up Keeper parameters, see “Using the Keeper Data Log” on page 55 .
387 Keeper Rec. Num
Default: Read-only
Range: 0 - 128
Levels 2 (Clock)
This parameter shows how many records have been saved by the Keeper. For detailed information about setting up
Keeper parameters, see
“Using the Keeper Data Log” on page 55 .
388 Active Kpr. Record
Default: Read-only
Range: 0 - 128
Levels 2 (Clock)
This parameter shows the active Keeper record. For detailed information about setting up Keeper parameters, see
“Using the Keeper Data Log” on page 55 .
Table 7-2: Description of X5 Parameters (Page 10 of 40)