Filter types
vacon • 7
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
2.
F
ILTER
TYPES
2.1
RFI-filters
2.1.1
General
Table 1 shows the filters used to make the VACON
®
NX range of AC drives comply with EN/IEC
61800-3 for the domestic and industrial environment, in case the basic drive does not comply. All
enclosure sizes 4 - 9 comply with the requirements of EN/IEC 61800-3, ed 2 for the categories 1 and
2, the 690 V versions for category 3. The common DC bus system components and drives which have
rated current higher than 400 A are designed to category 4. Therefore the basic modules do not have
any specific compliance, but the whole installation has to be designed to comply with the
requirements.
The stand - alone and VACON
®
NXC solutions comply with category 3 requirements.
Definitions:
First environment
Environment that includes domestic premises and establishments directly connected without
intermediate transformers to a low-voltage power supply network, which supplies buildings used
for domestic purposes.
NOTE!
Houses, apartments, commercial premises or offices in a residential building are typical
examples of the first environment location.
Second environment
Environment that includes all establishments other than those directly connected to a low voltage
power supply network, which supplies buildings used for domestic purposes.
NOTE!
Industrial areas, technical areas of any building fed from a dedicated transformer are typical
examples of the second environment locations (IEC 923/04).
EMC designation C
=> fulfils the requirements of category 1: PDS (power drive system (AC drive plus
motor)) of rated voltage less than 1000 V, intended for use in the first environment.
EMC designation
H => fulfils the requirements of category 2: PDS of rated voltage less than 1000 V,
which is neither a plug-in device nor a movable device and, when used in the first environment, is
intended to be installed and commissioned only by a professional.
NOTE!
A professional is a person or an organization having necessary skills in installing and/or
commissioning power drive systems, including their EMC aspects.
EMC designation L
=> fulfils the requirements of category 3: PDS of rated voltage less than 1000 V,
intended for use in the second environment and not intended for use in the first environment.
EMC designation N
=> fulfils the requirements of category 4: PDS of rated voltage equal to or above
1000 V, or rated current equal to or above 400 A, or intended for use in complex systems in the
second environment.
NOTE!
In this case the compliance has to be verified case by case.
The filters must be correctly installed and grounded.
There are no standards at present for IT supplies (floating supplies) - the EMC code T shows that
the drives and drive modules have very small ground capacitance making them suitable for use on
IT supplies. The small capacitance is required as larger values would cause the installed ground
circuit monitoring circuits to fail. We recommend the use of monitors manufactured by Bender.
Содержание RFI-0012-5-IP54
Страница 1: ...vacon nx ac drives rfi du dt and sine filters user manual...
Страница 2: ......