Vacon NXP series, Руководство пользователя

Страница: 82 / 102

CONTROL KEYPAD vacon • 81
Figure 9-10. Change of application
9.3.6.3 Copy parameters
The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another or to store parameter sets in the internal memory of the converter. All the
parameter groups are first
uploaded
to the keypad, then the keypad is connected to another drive
and then the parameter groups are
downloaded
to it (or possibly back to the same drive).
Before any parameters can successfully be copied from one drive to another the drive has to be
stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) embodies four functions:
Parameter sets (S6.3.1)
The Vacon NX frequency converter features a possibility for the user to load back the factory default
parameter values and to store and load two customised parameter sets (all parameters included in
the application).
On Parameter sets page (S6.3.1), push the Menu button right to enter the Edit menu . The text
LoadFactDef begins to blink and you can confirm the loading of factory defaults by pushing the Enter
button . The drive resets automatically.
Alternatively you can choose any other of the storing or loading functions with the Browser buttons .
Confirm with the Enter button . Wait until 'OK' appears on the display.
S1 S11
STOP READY
I/Oterm
STOP READY
I/O term
STOP READY
I/Oterm
enter
STOP READY
I/O term
System Menu
Application
Standard
Application
Standard
Application
Multi-step
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com