Vacon 50X, Руководство пользователя

Страница: 90 / 132

89 vacon vacon 50x parameters
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
7
The SIO Control Word parameter allows control of the drive through Modbus communi-
cations.
The following bits are used with this parameter:
These parameters provide access for changing the frequency reference over the serial
link.
The Status Word parameter provides status of the drive operation to a serial link user.
The following bits are used with this parameter:
904 SIO Cntl Word Default: 0x0000
Range: Text string
Level 2 (SIO)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
0
Bit When Set to 1 Signifies Bit When Set to 1 Signifies
8 Alt Ramp 0 SLC (Run)
9 PI Enable 1 SLF (Ref)
10 Not Used 2 FWD
11 Cur Lim 3 REV
12 DCI 4 FEXT2
13 CTS 5 Preset Input 1 (PS1)
14 Ref Switch 6 Preset Input 2 (PS2)
15 Fault Reset 7 Preset Input 3 (PS3)
905 Ext Ref Freq 1
906 Ext Ref Freq 2
Default: 0.0 Hz
Range: Min. Freq.–Max. Freq.
Level 2 (SIO)
908 Status Word Default: Read-Only
Range: Text string
Level 2 (SIO)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit When Set to 1 Signifies Bit When Set to 1 Signifies
8 Alt Ramp 0 SLC (Run)
9 SL Override 1 SLF (Ref)
10 Remote 2 FWD run
11 Curr Lim 3 REV run
12 DCI 4 FEXT2
13 Jogging 5 Accel
14 Zero Spd 6 Decel
15 Drive Flt 7 At Speed