Vacon 100 INDUSTRIAL, Инструкция по установке и эксплуатации

Страница: 46 / 47

Annex vacon • 44
24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
9
9. A
NNEX
Process Data IN (Master to Slave)
Use of Process Data In variables depends on the used application. The configuration of the data
is free.
Process Data OUT (Slave to Master)
Use of Process Data Out variables depends on the used application.
The Fieldbus Master can read the frequency converter’s actual values using process data vari-
ables. Control applications use process data as follows:
Table 31. Process Data OUT variables
ID Data Value Unit Scale
2104 Process data OUT 1 Output Frequency Hz 0,01 Hz
2105 Process data OUT 2 Motor Speed rpm 1 rpm
2106 Process data OUT 3 Motor Current A 0,1 A
2107 Process data OUT 4 Motor Torque % 0,1 %
2108 Process data OUT 5 Motor Power % 0,1 %
2109 Process data OUT 6 Motor Voltage V 0,1 V
2110 Process data OUT 7 DC link voltage V 1 V
2111 Process data OUT 8 Active Fault Code - -