Vacon 100 INDUSTRIAL, Инструкция по установке и эксплуатации

Страница: 23 / 47

5
vacon • 21 Programming
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
5.4 Modbus TCP parameter descriptions
5.4.1 Ethernet common settings
P5.8.1.1 IP
ADDRESS MODE
Selectable alternatives are
DHCP
(Dynamic Host Configuration Protocol) and
Fixed
.
DHCP protocol gives IP addresses to new devices connecting to local network. This address is
valid for a certain period of time. If no DHCP server is found an automatic random IP is given.
A fixed IP address is specified manually and it does not change.
When the mode is changed from DHCP to Fixed the addresses will read
IP
: 192.168.0.10
Subnet mask
: 0.0.0.0
Default gateway
: 0.0.0.0
P5.8.1.2 IP
ADDRESS
An
IP address
is a series of numbers (like above) specific to the device connected to the Inter-
net.
P5.8.1.3 S
UBNET MASK
The network mask marks all the bits of an IP address for the identification of the network and
the subnetwork.
P5.8.1.4 D
EFAULT GATEWAY
Gateway address is the IP address of a network point that acts as an entrance to another net-
work.
P5.8.1.5 MAC
ADDRESS
The MAC address of the control board.
MAC address (Media Access Control) is a unique address given to each network host. It is not
editable.