User interfaces
vacon • 61
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5.3.1
Quick setup
In the Quick Setup parameter group you will find the different wizards of the VACON
®
100 X Solar
Pump Application. More detailed information on the parameters of this group you will find in chap-
ter 4.
5.3.2
Monitor
Multi-monitor
NOTE:
This menu is not available in text keypad.
On the multi-monitor page, you can collect four to nine values that you wish to monitor.
Figure 26. Multi-monitoring page
Change the monitored value by activating the value cell (with arrow buttons left/right) and clicking
OK. Then choose a new item on the Monitoring values list and click OK again. More detailed infor-
mation on the monitor items can be found in chapter 6.
Trend curve
The
Trend Curve
feature is a graphical presentation of two monitor values at a time.
Basic
The basic monitoring values are the actual values of selected parameters and signals as well as
statuses and measurements.
I/O
Statuses and levels of various input and output signal values can be monitored here.
Extras/Advanced
Monitoring of different advanced values, e.g. fieldbus values.
Timer functions
Monitoring of timer functions and the Real Time Clock.
PID Controller
Monitoring of PID controller values.
Main Menu
Quick Setup
( 17 )
Parameters
( 12 )
ID:
M1
STOP
READY
I/O
( 5 )
Monitor
Monitor
Multimonitor
(13)
Basic
(13)
Timer functions
(10)
STOP
READY
I/O
ID:
M2.1
0.0rpm
STOP
READY
I/O
Multimonitor
0.00 Hz
ID25
FreqReference
Output Freq
0.00Hz
Motor Curre
0.00A
Motor Torque
0.00%
Motor Voltage
Motor Speed
Motor Tempera
Unit Tempera
DC-link volt
20.0 Hz
FreqReferenc
0.0V
0.0V
81.9°C
0.0%
ID:1
M2.1.1.1
STOP
Ready
I/O
FreqReference
Output frequency
Motor Power
FreqReference
Motor Speed
Motor Current
Motor Torque
0.00 Hz
10.00 Hz
0.00 rpm
0.00 A
0.00 %
0.00 %
OK
OK
OK
OK
9171.emf
