Vacon 100 flow Скачать руководство пользователя страница 230

Страница: 230 / 386

P3.1.4.13.3 TORQUE STABILATOR DAMPING TIME CONSTANT (ID 1413)

Use this parameter to set the damping time constant of the torque stabiliser.

P3.1.4.13.4 TORQUE STABILATOR DAMPING TIME CONSTANT FOR PM MOTORS (ID 1735)

Use this parameter to set the damping time constant of the torque stabiliser for permanent

magnet or reluctance motors.

P3.1.4.13.5 TORQUE STABILATOR FILTER TIME CONSTANT (ID 15650)

Use this parameter to set the lowpass filtering time constant of the torque stabilizer.

P3.1.4.13.6 TORQUE STABILATOR FILTER TIME CONSTANT FOR PM MOTORS (ID 15651)

Use this parameter to set the lowpass filtering time constant of the torque stabilizer for

permanent magnet or reluctance motors.

10.3

START/STOP SETUP

The drive is started and stopped from a control place. Each control place has a different

parameter to select the source of the frequency reference. You must give the start and stop

commands in each control place.

The local control place is always the keypad. With parameter P3.2.1 Remote Control Place

you can select the remote control place (I/O or Fieldbus). The selected control place shows

on the status bar of the keypad.

VACON · 230

PARAMETER DESCRIPTIONS

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Содержание 100 flow



































































































































































































































































































































































































Результаты поиска

Содержание 100 flow

Отзывы:

Vacon 100 flow, Руководство по применению, Страница: 230 / 386

Результаты поиска

Содержание 100 flow

Отзывы: