Vaco VAC1212W, Инструкция по эксплуатации

Страница: 11 / 83

11
ASSEMBLY AND INSTALLATION
SCOPE OF DELIVERY
•
1 x Device
•
1 x Air exhaust hose
•
1 x Air inlet
•
1 x Window adapter
•
1 x Window slider
•
1 x Remote control
•
1 x Manual
UNPACKING THE DEVICE
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power cable is not damaged and that
you do not damage it during unwinding.
START-UP
•
When positioning the device, observe the
minimum distance 50 cm from walls or other
objects.
•
Before restarting the device, check the condition
of the power cable. If there are doubts, contact
the customer service.
•
Set the device up in an upright and stable
position.
•
Do not create tripping hazards when laying the
power cable or other electric cables, especially
when positioning the device in the middle of the
room.
•
Keep air inlets and outlets as well as the air
exhaust hose housing free.
•
Make sure that no curtains or other objects
interfere with the air flow.