background image

 

WARNING Symbols

 

 

This symbol alerts you to dangerous voltage and the risk of electrical 
shock. 

 

 

This symbol identifies important operating and service instructions. 

 

Safety instructions 

1)  Read these instructions. 
2)  Keep these instructions. 
3)  Heed all warnings. 
4)  Follow all instructions. 
5)  Do not use this LCD TV near water. 
6)  Clean the LCD TV with a dry cloth only. Do not use liquid, alcohol, or aerosol 

cleaners. 

7)  Do not block any ventilation openings. Install your LCD TV in a well ventilated area. 
8)  Keep your LCD TV away from moisture, excessive dust and any heat sources, 

such as radiators, heat registers, stoves, or any other apparatus (including 
amplifiers) that produce heat. 

9)  Do not remove the back cover. There are no user-serviceable parts inside. 
10)  Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug 

has two blades with one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The third prong is provided for your safety. If 
the plug does not fit into your wall outlet, consult an electrician and replace the 
obsolete outlet. 

11)  Protect all cables from being walked on. Make sure they do not become pinched, 

particularly at their plugs, receptacles and at the points where they exit from the 
LCD TV. 

12)  Never rest objects on the power cord or route it through a high-traffic area. It is 

better to use the power cord that is connected to the equipment. 

13)  Add only attachments and accessories specified by the manufacturer. 
14)  Use this device only with a cart, stand, tripod, bracket or 

table specified by the manufacturer or sold with the LCD TV. 
When using the device on a cart, use caution to avoid injury 
from the cart tipping over. 

15)  Unplug this LCD TV during lightening storms or when you 

are not using it for long periods of time. 

16)  Refer all service requests to qualified service personnel. 

Servicing may be required if the LCD TV has been damaged in any way, such as: 
the power cord or plug are damaged; liquid has been spilled or objects have fallen 
onto the equipment; the LCD TV has been exposed to rain or moisture; the device 
does not operate normally; or the device has been dropped. 

Содержание 22" LCD TVs LTV22HD





























Отзывы: