10 Trouble-shooting
Malfunction
Possible cause
Solution/Measures
The temperature
zones and the cool-
ing compartments
flash and/or an
acoustic signal is
emitted.
▪
The cooling compartment
temperature is 8 °C
higher than the set tem-
perature.
▸ Touch any button.
–
The current temperature value
is displayed; the cooling com-
partment flashes until the set
temperature is reached.
▸ If there is no warm bottle in the
appliance: Contact Customer Ser-
vices.
▪
There has been a power
failure. The flashing tem-
perature display shows
the actual temperature
value of the appliance.
▸ Touch any button.
–
The set temperature is shown
in the temperature display.
▪
The frequent appearance
of warnings indicates a
technical problem.
▸ Contact Customer Services.
Cooling compartment
illumination is on
when the door is
closed.
▪
Permanent interior illumin-
ation is active.
▸ Deactivate permanent interior illu-
mination.
Error messages
F10–F15
▪
Temperature sensor is
faulty.
▸ Contact Customer Services.
–
The appliance switches to the
emergency mode. The appli-
ance continues to cool, but it
cannot detect the current tem-
perature value and cannot guar-
antee that the temperature is
controlled at the selected set
value.
Error messages A3,
A4, A5
▪
Ambient temperature out-
side operating range of
10–43 °C.
▸ Bring the temperature of the
room where the appliance is in-
stalled to within the operating
range of 10–43 °C.
Error message F_ _
▪
Various situations can
lead to an F message.
▸ Contact Customer Services.
24
