4 Operation
Procedure for the WineCooler V4000 45 (51113)
▸ Touch the
,
or
button.
–
The temperature display for the cooling compartment flashes on the right-hand side
of the display.
▸ Touch the
or
button and select the desired temperature for the
cooling com-
partment
.
▸ Confirm with the
button to accept the entry.
–
The temperature setting has been entered successfully.
–
The temperature will be reached in a few hours, depending on the setting.
The effective temperature may at times be different from the selected set temperat-
ure value if the door is open for an extended period of time or if warm bottles have
been placed inside.
4.3
Selecting appliance functions
▸ Touch the
/
/
/
function button.
–
The corresponding settings level is called up.
▸ Select appliance functions using the
and
navigation arrows.
If a button is touched that has no function in the particular context, a double
acoustic signal is emitted and «- -» is shown on the left-/right-hand side of the dis-
play.
4.4
Cancelling settings
Settings can be cancelled or discarded in one of four ways, such that any changed val-
ues are not accepted.
▸ To cancel or discard a setting, the following options are available:
▪
Wait 30 seconds without interaction.
▪
Touch the active function button
/
/
/
again.
▪
Touch the
button.
▪
Close the cooling compartment door.
4.5
Switching the appliance off
▸ Hold the
button depressed for 3 seconds.
–
The appliance is switched off.
–
«OF» is shown on the left- and right-hand side of the display for 30 seconds.
If the appliance is being taken out of operation, e.g. for repair work or disposal:
▸ Remove the mains plug from the mains socket.
▸ When not in use for an extended period of time: Empty and clean the appliance.
Leave the appliance door open.
11
