V-ZUG Unimatic TSL WP Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 44

V-ZUG Unimatic TSL WP Скачать руководство пользователя страница 20

6 Drying

6.4

Selecting an automatic programme

▸ Close the appliance door.

–

The indicator lights for the programme buttons and the additional programme flash.

max. 1 kg Wolltextilien

Wolle

1h35

–

The indicator lights for the additional functions that may be selected flash for
15 seconds.

A new programme can be selected during this time. All additional functions selec-
ted are cleared and must be reselected.

If no other button is pressed within the next 15 seconds, the programme selected starts
automatically.

6.5

Selecting timed drying

▸ Close the appliance door.

–

The indicator lights for the programme buttons and the additional programme flash.

max. 1 kg Wolltextilien

Wolle

1h35

▸ Press the

button.

▸ Press repeatedly to select the desired duration, i.e. 10, 20, 30, 40, 50, 60 or 90

minutes.

–

The duration selected appears in the display.

–

The indicator lights for the additional functions that may be selected flash for
15 seconds.

The duration selected always includes a 10-minute «Cool down/Airing» phase.

6.6

Selecting ultra care or easy care

▸ While the indicator lights flash, press the

or

button.

20

«
...
18
19
20
21
22
...
»

Содержание Unimatic TSL WP













































Отзывы:

Нет отзывов