![background image](http://html1.mh-extra.com/html/v-zug/refreshbutler-v6000/refreshbutler-v6000_operating-instructions-manual_3093280029.webp)
6 User settings
6.10
Cleaning the air duct
Over time, deposits can build up in the air duct. With this function the air duct is cleaned
using steam. If the «Refresh» or «Hygiene» programme is used every second day, the
«Cleaning the air duct» programme must be carried out about 1× a year.
Clean
Press OK to start automatic cleaning
of air duct.
1 / 5
▸ Press the
button to clean the air
duct.
▸ Follow the instructions in the Touch-
Display.
6.11
Operating mode
There are two different operating modes. The appliance can be operated in the «Stand-
ard» mode or in the noise-optimized «Silent» mode.
6.12
V-ZUG Service
This function is for use by the service technician.
6.13
Updating the software
With this function the software can be updated.
Starting programme (see page 24)
▸ Push the SD card with the latest
software into the card slot.
▸ Press the
button to update the
software.
–
The software starts updating.
–
The display goes black and the
background illumination starts to
flash.
At the end of the programme:
–
The background illumination illuminates a constant green.
–
A button tone indicates that the software has finished updating.
▸ Remove the SD card from the card slot.
–
The appliance can now be operated as normal.
29
Содержание RefreshButler V6000
Страница 1: ...Operating instructions RefreshButler V6000 Textile care system...
Страница 41: ...41 13 Notes...
Страница 42: ...42...