V-ZUG CSTXSL60 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 88

V-ZUG CSTXSL60 Скачать руководство пользователя страница 63

12

Care and maintenance

Risk of burns from hot surfaces!

You should allow the appliance and the accessories to cool before
cleaning.

Do not reach into the water tank compartment if the following appears
in the display: «Please do not remove the water tank».

Improper use can result in damage to the appliance!

Do not use any abrasive or caustic cleaning agents, metal scrapers
that are sharp or scratch, steel wool, abrasive scouring pads, etc.
These products will damage the surfaces. Glass surfaces that are
scratched can crack.

Never use a steam cleaner to clean the appliance.

12.1

Cleaning the exterior

►

Remove any soiling or excess cleaning solution immediately.

►

Clean the surfaces with a soft cloth dampened with water and a little wash-
ing-up liquid – for metallic surfaces rub in the direction of the original polish
lines.

►

Wipe dry with a soft cloth.

12.2

Cleaning the cooking space

Improper use can result in damage to the appliance!

Do not bend the temperature sensor.

►

Any condensate or food particles must be completely removed after each
cooking session with steam.

►

Put a stainless steel tray under the perforated cooking tray or wire shelf
when cooking to catch food particles and condensate.

►

Remove any soiling from the cooking space while still hand warm using a
soft cloth dampened with water and a little washing-up liquid. Wipe dry with
a soft cloth.

63

«
...
61
62
63
64
65
...
»

Содержание CSTXSL60

























































































Отзывы:

Нет отзывов