V-ZUG CookTopInduction V4000, Руководство по эксплуатации, Страница: 23 / 32

9 Trouble-shooting
9 Trouble-shooting
You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full (message and E numbers) and then call Customer Services or report it
to us online.
9.1 Error messages
Display Possible cause Solution
flashes alternately
with the power level
▪ Cookware is not suitable for
use with induction hobs. ▸ Use suitable magnetic
cookware (see page 9).
▪ Cookware is not standing on
the cooking zone.
▪ Cookware is too small for the
cooking zone selected.
▸ Ensure cookware corres-
ponds to the size of the
cooking zone.
illuminates ▪ The childproof lock is activ-
ated. ▸ Switch the childproof lock
off (see page 16).
A continuous acoustic
signal is emitted,
flashes and the cook-
ing zone switches off ▪ A button or a slider was
touched for longer than
10 seconds.
▪ Object (e.g. pan, dish) on the
control panel.
▪ Food boiled over on to the
control panel.
▸ Remove object or food
that has boiled over.
▸ The appliance can be
used again as normal.
▪ The button was operated
for longer than 25 seconds. ▸ Touch the button to ac-
knowledge the fault.
flashes ▪ The excess temperature pro-
tection of a cooking zone
was triggered. ▸ Allow the cooking zone to
cool down.
▸ Continue cooking on a dif-
ferent cooking zone.
▸ Check cookware.
flashes ▪ An interruption in the power
supply. ▸ Touch any button to ac-
knowledge the display.
▸ The appliance can be
used again as normal.
or and a num-
ber illuminate in the
display
▪ Internal error occurred. ▸ Note down error message
in full and appliance's SN.
▸ Contact Customer Ser-
vices.
23